The user manual must be read and the content within the manual must be followed. It is your responsibility to perform pre-ride checks to ensure safety and to remedy any problem you find. Pre-ride checks are necessary not only for safety but also because a breakdown or a flat tire can lead to major problems.

Before riding the motorcycle, check the following:

• Fuel level – if the tank is empty, fill up with gasoline.
• Throttle grip – check that it operates smoothly and that it closes fully in all handlebar positions.
• Engine oil – check the level, add if necessary. Check for leaks.
• Brakes – inspection procedure
• Front: Check the brake fluid level and pad wear.
• Rear: Check shoe wear and clearance, adjust if necessary.
• Lights and Horn – Check that the headlight, indicator lights and horn are working properly.
• Wheels and tires – Check their condition, air pressure, and adjust if necessary.
• Make sure you are physically ready, mentally focused, and have not consumed alcohol or taken medication.
• Make sure you and your passenger are wearing an approved motorcycle helmet and protective clothing. Tell your passenger to hold the grab bar or wrap their arms around your waist, lean with you into turns, and keep their feet on the footrest even when the motorcycle is stopped. 

Storage

 If you are not going to use your Electric Vehicle for a long time, consider the recommendations given below. This process will prevent the E-Bike from being exposed to corrosion or damage during long-term storage. Additionally, if your Electric Vehicle has any malfunction, be sure to fix it before storage; if this malfunction is forgotten during use after storage, you may face serious problems.

•  Place your vehicle on a flat surface with wheel chocks.
• Store it in a dry environment to protect it from moisture and humidity.
• To maintain battery performance, charge it at least once every 15 days.
• Clean your Electric Vehicle and apply anti-rust and lubrication to parts that may rust.
• Reduce tire air pressure by 20% and remove tire contact with the ground.
• Cover the vehicle with a cover or tarp.

Post-Storage Use

• Remove the covers from the Electric Vehicle and clean the surface.
• Check the battery and charge if necessary. If not charged, sudden current to the vehicle's batteries may cause them to swell or explode. (Must be charged according to the User Manual)
• Check lubrication points and lubricate if necessary.
• After performing your pre-ride checks, subject the vehicle to a test ride.
• In the event of any malfunction and/or problem, be sure to contact the authorized service.

For Cleaning Process

• During the cleaning process, prevent electrical parts from coming into contact with water.
• First, rinse with cold water to remove dust and loose dirt from the vehicle.
• Thoroughly wipe the vehicle with water using a sponge or soft cloth. Be careful not to scratch plastic parts and other components during wiping.
• After wiping and cleaning, rinse the E-bike with clean water.
• Finally, dry the E-Scooter.
• Before starting to use, see "Pre-ride Checks"
• Your vehicle's brake components may be wet; in this case, your brakes are dangerous. If such a situation exists, test your brakes at low speed and brake intermittently to allow the brakes to return to their normal performance.
• Avoid washing with high-pressure guns. Wash with a regular hose.
• Be careful not to let liquid contact the inside of the motor or wheel, ensuring not to exceed the axle level of the wheel.